VScom 200I - UPCI Card, 2 Port RS232, RS422/485
- — Garantía: 1 Year Warranty
- — Devolución y cambio hasta 30 días
- — Mejor precio
The VScom 200I uPCI is designed for RS232, RS422/485 industrial communication. It supports 2 independent RS232, RS422 or RS485 ports. Each port can be configured separate. Available modes : RS232, RS422 fullduplex RS485 full duplex (4 wire) RS485 half duplex (2 wire) with and without echo.
In RS485 modes applications enable transmission by simply sending data. This is done by ART (Automatic Receive Transmit Control) intelligence. The Transmitter is disabled exactly with the end of the last character sent. No modification is necessary in programs. In addition, hardware flow control and built-in termination resistors guarantee data integrity. All of these features make VScom 200I PCI suitable for harsh industrial applications.
Features
- Universal PCI 3.3 / 5.0V
- 2x RS232, RS422/485
- RS485 ART (Automatic Receive Transmit Control)
- RS485 in 3 operation modes
- PCI Plug and Play
- IRQ Interrupt sharing, only one Interrupt per card
- Drivers for Windows 95 to 7/2008 R2
- Software compatibel with DOS, Windows 3.11, OS/2, Linux and div. Unix
- Compact board (half-size)
- Hardware flow control
- Built-in termination resistors
Specifications
| I/O controller | 2x 16C550C or compatible, each with 16 bytes Tx/Rx FIFO |
| Connector type | Male DB9 |
| Bus interface | PCI version 2.1 (32bit) Universal PCI 3.3V / 5.0V |
| Serial interface | RS232, RS422 / 485 |
| No. of ports | 2 |
| Signals | RS232 Tx, Rx, CTS/RTS, DTR, DSR, DCD, GND RS422 TxD+/-, RxD+/-, RTS+/-, CTS+/-, GND RS485 Data+/-, GND |
| RS485 data control | ART (Automatic Receive Transmit control) |
| Built-in termination resistor | RS422 120 Ohm RS485 120 Ohm, jumper enable / disable |
| Speed | up to 921.6Kbps |
| Max. no. of ports | Unlimited |
| Parity | None, even, odd, space, mark |
| Data bits | 5, 6, 7, 8 |
| Stop bits | 1, 1.5, 2 |
| IRQ | Assigned by System |
| I/O address | Assigned by System |
| RS232 | full duplex |
| RS422 | full duplex |
| RS485 | 4 wire , full duplex |
| RS485 | 2 wire, half duplex, with echo |
| RS485 | 2 wire, half duplex, without echo |
| Power requirement | 430mA max.(+5V) |
| Operation temp. | 0°C - 55°C |
| Dimension | 120mm x 100mm |
| Windows 2000 up to 7 | VScom high performance serial driver, x86 and x64 Editions |
| Server 2000 to 2008 R2 | VScom high performance serial driver, x86 and x64 Editions |
| Windows NT 4.0 | VScom high performance serial driver control panel applet |
| Windows 95, 98, SE, ME | VScom high performance serial driver |
| DOS | virtuell address driver and compatibility tools real DOS Com port emulation |
| OS/2 | Supported by COM16 driver in recent system releases Third party serial driver SIO.SYS available |
| Linux | Kernel 2.6 and up: built-in support Previous kernel: VScom high performance real tty driver |
| div.UNIX | configuration instructions |
| Packing list | VScom 200I UPCI card CD, English documentation |
