VSCOM NETCOM PLUS 113 MINI - Network Transceiver Module, 1x RS232/RS422/485
- — Garantie: ans de garantie
- — Retour et échange jusqu'à 30 jours
- — Meilleur prix
The Ethernet to Serial Gateways NetCom Plus connect RS232 or RS485 devices to a network running TCP/IP. The NetCom Plus Mini Serial Device Servers are rugged industrial devices with ultra small metal case and DIN-Rail or wall mounting, further supported by ESD protection on serial ports and power input. The very low power demand is an extra advantage. The NetCom Plus Mini 113 provides one RS232/422/485 port.
Windows Driver installs Com Ports
The driver for Windows operating system installs Virtual Com Ports. These operate in the same way as built-in ports, but via Ethernet. Easy-to-use Installation and Management software guides users trough the configuration.
High Speed Serial Ports, Low Power
The serial ports allow data rates of up to 3.0Mbps in RS422/485 or 1000kbps in RS232 modes. The ports also allow every non-standard bitrate up to 960kbps, and many above that. The gateways demand less than 1W of power. The flexible input allows for various sources of customers choice.
Easy Configuration, versatile Operation Modes
NetCom+ are configured over Driver Panels and WEB Browser. This is also possible via serial Port, Telnet or SNMP. NetCom+ provide Driver Mode, TCP/IP or UDP connection, and many operation modes beyond those.
Secure Remote Access for Monitoring
For NetCom Plus series there is a software option using the viaVPN Cloud system to be remotely accessed and monitored over Internet. viaVPN provides secure and strongly encrypted access, without any reconfiguration of existing firewalls. The access to the firmware via Ethernet or WLAN is extended by viaVPN over Internet, protected by a VPN tunnel. If the Com port is not occupied by local access, also remote operation over Internet is possible.
Features
- Ethernet to serial 1 port RS232/422/485
- Virtual Com Port driver for Windows
- Secure Server with latest SSL/AES-256 encryption
- Operation in Driver Mode, TCP/IP and many other
- Quick Configuration over Driver and Browser
- ESD protection on serial port, Ethernet, DC power
- Wall mountable, DIN Rail as an option
- Only 1W power consumption
- Ultra small metal case
Specifications
Speed/Type | 100Mbps/10Mbps Auto-detecting |
Connector | RJ45 (8P8C) 8 pin |
LEDs | Power, Ready, Ethernet Link / Speed |
No. of Ports/Type | 1 × RS232/422/485 selected by DIP-switch or software |
Connector | DB-9 male |
Protection | 16kV ESD surge protection |
Operating Modes | RS232 RS422 full duplex (120Ω on/off) RS485 4 wire, full duplex (120Ω on/off) RS485 2 wire, half duplex (120Ω on/off) |
Configuration | One DIP switch sets operating mode and RS422/485 termination Also software can configure this No High/Low biasing resistors needed |
Signals | RS232: TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GND RS422: Tx+/-, Rx+/-, GND RS485 4 wire: Tx+/-, Rx+/-, GND RS485 2 wire: Data+/-, GND |
RS485 Data Direction Control | ARTc (Automatic Receive Transmit control) |
Data bits | 7, 8 |
Stop bits | 1, 2 |
Parity | None, Even, Odd, Mark, Space |
Flow Control | RTS/CTS, XON/XOFF |
Baudrate | RS232: 180bps - 921.6/1000kbps RS422: up to 3Mbps RS485: up to 3Mbps Supports non-standard baudrates |
LEDs | TxD/RxD for each port (bi-color) |
Network Protocols | TCP, UDP, Telnet, PPP, DHCP, ICMP, UPnP, HTTP, LPD, SNMP V1/2c/3, DNS, openVPN |
Virtual-COM Mode | Driver creates virtual COM ports via NetCom protocol © for Windows XP/7/8/10, Win-Server 2003 to 2008 R2 (x86/x64) |
Socket Modes | TCP RAW Server, TCP RAW Client, UDP Mode, Print Server Automatic switching between Virtual-COM and TCP-RAW Server modes. |
Tunnel Modes | Null Modem Tunnel and IP Modem |
Fixed TTY Drivers | socat Tool, Linux OS |
Installation | NetCom Plus Manager automatically finds NetCom Plus devices in the local network. |
UPnP | With Network discovery enabled NetCom Plus servers announce their presence via UPnP making their IP visible. |
Configuration | via WEB-Browser, Driver Panels, NetCom Manager, serial console, Telnet console or SNMP |
Firewall | Virtual-COM mode works through firewalls |
Firmware Update | via WEB Browser |
Password Protection | for all available configuration options e.g. via WEB-Browser |
Secure Server | create openVPN™ tunnels, for encrypted transmission of all serial and configuration data using high security SSL/TLS standards. |
Security | All communications use openVPN-tunnels encrypted by SSL/TLS and AES-256 standards. |
Firewall friendly | No Reconfiguration of firewalls is required for viaVPN remote access. |
Input Voltage | 7 - 35V DC |
Power Consumption | 150 mA @ 12V, 1.8W max |
Connector | 2-pin Terminal Block |
Case | 0.8mm sheet metal |
Weight | w/o box 0.10kg; w/h box 0.19g |
Dimensions | 50×72×22 mm³ (W×L×H) Case 72×72×22 mm³ (W×L×H) with mounting wings |
Packaged | 85×122×55 mm³ |
Mounting | DIN-Rail (optional) Wall mount |
Operating Temp | −20°C - 65°C |
Storage Temp | −20°C – 85°C |
Ambient Humidity | 5-95% non condensing |
Declarations | CE, FCC |
EMI | EN 55022 Class B EN 61000-3-2: Limits of harmonic current emissions EN 61000-3-3: Limitation of voltage changes 47 CFR FCC Part 15 Subpart B |
EMS (EN 55024) | EN 61000-4-3: Radiated RFI EN 61000-4-4: Electrical Fast Transient EN 61000-4-5: Surge EN 61000-4-6: Induced RFI EN 61000-4-8: Power Frequency Magnetic Field EN 61000-4-11: Power supply dips |
ESD | EN 61000-4-2 4kV contact 8kV air for Serial Port Ethernet DC Power connector |
MTBF | available soon |
Standard | Telcordia (Bellcore) Standard; RelCalc. 5.0 BELL-7 |
Packing list | NetCom Plus Serial Device Server Terminal block for Power Supply |