Teltonika RUT950 LTE 4G Router

Product Description

RUT950 is highly reliable and secure LTE router for professional applications. Router delivers high performance, mission-critical cellular communication. RUT950 is equipped with connectivity redundancy through dual SIM failover. External antenna connectors make it possible to attach desired antennas and to easily find the best signal location.

RUT950 Schema

Standard package contains

Router RUT950.
Euro PSU.
2 x LTE antennas (swivel, SMA male).
2 x WiFi antennas (swivel, RP-SMA male).
Ethernet cable (1.5 m).
QSG (Quick Start Guide).
Packaging box.

Product features

TECHNOLOGY
4G (LTE) –Up to 150 Mbps i Long-Term Evolution (LTE) is a standard for high-speed wireless communication for mobile phones and data terminals.
3G –Up to 42 Mbps i 3G is the third generation of wireless mobile telecommunications technology.
2G –Up to 236.8 kbps i General Packet Radio Service (GPRS) is a packet oriented mobile data service based on the 2G technology.
Wi-Fi –Up to 300 Mbps i Wi-Fi is a technology that allows electronic devices to connect to a wireless with 2.4GHz radio frequency signal
Ethernet –4 ports i Ethernet is widely used local area network (LAN) technology for interconnecting computers in a limited area such as a home, school, computer laboratory or office building.
SMS i Short Message Service (SMS) is a text messaging service component.

HARDWARE
2x SIM Card (Dual-SIM) i Allows to put 2 SIM cards (can be from different operators) for internet connection
Operating temperature range -40°C to 75° C i Temperature range in which device can operate effectively
DIN Rail mounting i Mounting kit which allows device mount on metal rail.
4x LAN 10/100Mbps Ethernet ports

FIRMWARE
Remote configuration over SMS i The remote configuration via SMS gives an ability to configure the device via SMS
Bridge mode i Bridge mode lets end device to connect dirrectly to operator and receive IP address from it
Automatic and manual operator selection i Device can select network operator automaticly and manually
Static routes i Static routes can be configured on device
PPPoE i Point-to-Point Protocol over Ethernet. PPPoE is a specification for connecting the users on an Ethernet to the internet through a common broadband medium, such as DSL line, wireless device or cable modem.
NTP i Device internal clock can be sinchronized via internet with NTP (Network Time Protocol)
Wireless Hotspot i Device has Wireless Hotspot. Wireless hotspot is more advanced version of Wireless Access Point with more customizability
Wireless Client i Device can connect to another Access Point as a client (Wi-Fi WAN)
Wireless AP i Device can work as a wireless access point
Ping reboot i Device can take appropriate action if it cannot ping specific IP address
Periodic reboot i Device can be configured to restart periodically
Real-time graphs i Device can display realtime graphs, e.g. signal strength, connection count
Backup WAN i Backup WAN feature allows device to swtich to secondary internet source if primary one fails
Mobile Traffic counter i Device can display mobile traffic usage information
Connection status overview bar i All device information can be seen in one page (System information, network information, connection status, recent events)
Configuration backup/restore i Device configuration can be saved to file and uploaded to same or other routers
VRRP i Virtual Router Redundancy Protocol - an election protocol that dynamically assigns responsibility for one or more virtual router(s) to the VRRP router(s) on a LAN, allowing several routers on a multiaccess link to utilize the same virtual IP address.
IPSec i The IPsec protocol client enables the router to establish a secure connection to an IPsec peer via the Internet
GRE Tunnel i GRE (Generic Routing Encapsulation RFC2784) is a solution for tunneling RFC1812 private address-space traffic over an intermediate TCP/IP network such as the Internet. GRE tunneling does not use encryption it simply encapsulates data and sends it over the WAN.
OpenVPN i OpenVPN is an open-source software application that implements virtual private network (VPN) techniques for creating secure point-to-point or site-to-site connections in routed or bridged configurations and remote access facilities. It uses a custom security protocol that utilizes SSL/TLS for key exchange.
PPTP i Point-to-Point Tunneling Protocol (PPTP) is a protocol (set of communication rules) that allows corporations to extend their own corporate network through private over the public Internet.
L2TP i In computer networking, Layer 2 Tunneling Protocol (L2TP) is a tunneling protocol used to support virtual private networks (VPNs) or as part of the delivery of services by ISPs. It does not provide any encryption or confidentiality by itself.
SNMP i Simple Network Management Protocol - a set of protocols for managing complex networks. SNMP works by sending messages, called protocol data units (PDUs), to different parts of a network.
SNMP trap i Asynchronous notification from agent to manager. SNMP traps enable an agent to notify the management station of significant events by way of an unsolicited SNMP message
Send/receive SMS i Device can send and receive SMS messages
Status via SMS i Device status information can be received from device via SMS message
SMS reboot i Device can be restarted via SMS
3G/4G enable/disable via SMS i Device's mobile connection (3G/4G) can be enabled or disabled via SMS message
Wireless on/off via SMS i Wireless device adapter can be controlled remotely via SMS
OpenVPN ON and OFF via SMS i Device's OpenVPN can be turned on or off via SMS message
Web Filter i Device can block specific host names or only allow users to access host names from the white list.
Mobile on Demand i Device can disconnect it's data connection after specified amount of time of inactivity. (Only use data when it is needed)
Mobile Data Limit i Device can stop providing internet access if mobile data limit is reached.
Configuration Profiles i Device can have several profiles with different configuration
Event logging i Device can log events, e.g.: leassed IP addresses, connections, system events, SMS messages
QoS i Quality of Service (QoS) is an advanced feature that prioritizes internet traffic for applications, online gaming, Ethernet LAN ports, or specified MAC addresses to minimize the impact of busy bandwidth
Restore point i Device's firmware and configuration can be downloaded as a single file and latter uploaded to router to restore both its previous firmware version and configuration
Call Utilities i Device can take action if it recieves a call. Actions: reboot, get status, turn Wi-Fi on/off, turn mobile data on/off, turn output on/off.
SIM switch i Device can switch active SIM automaticly if certain event occurs (Events: On weak signal, On data limit, On sms limit, On roaming, No network, On network denied, On data connection fail)
FOTA (Firmware Over The Air) i Firmware over the air solution. Device firmware can be updated from server.
Event reporting (via Email/SMS) i Device can send email or SMS if configured event happened
Integrated speed test i Device has integrated speed test functionality
Network Scanner with Topology display i Device can scan network topology (both LAN and WAN) and display it graphically
Disable Roaming i Device can be configured to not use mobile data while its in roaming
SMS gateway i Device has: HTTP Post/Get, Email to SMS, Scheduled SMS, SMS Forwarding and SMPP functionalities
OSPF i Open Shortest Path First (OSPF) is a routing protocol for Internet Protocol (IP) networks. It uses a link state routing (LSR) algorithm and falls into the group of interior routing protocols, operating within a single autonomous system (AS).
Access control safety i Access to the device can changed to different TCP port or be enabled/disabled.
SIM Idle protection i Device can periodically switch to secondary SIM card to prevent operator from disabling SIM card
VLAN i A virtual LAN (VLAN 802.1Q) is any broadcast domain that is partitioned and isolated in a computer network at the data link layer (OSI layer 2)
CLI i CLI (command-line interface) allows user to use linux commands for router configuration
Firewall i Device has configurable firewall (Port forwarding, traffic rules)
IP/MAC filter i Device can block devices with certain MAC addresses or allow connect only those devices, which MAC addresses are in the MAC list
TR-069 i TR-069 (Technical Report 069) is a technical specification that defines an application layer protocol for remote management of end-user devices
DHCP server i The Dynamic Host Configuration Protocol (DHCP) is a network protocol used to assign IP addresses and provide configuration information to devices such as servers, desktops, or mobile devices, so they can communicate on a network using the Internet Protocol (IP)
Dynamic DNS i Dynamic DNS (DDNS) is a domain name service allowing to link dynamic IP addresses to static hostname.
RMS support i Device supports Teltonika's RMS (Remote Mangement System)

Specifications

LTE up to 100 Mbps DL and 50 Mbps UL
DC-HSPA+ up to 42 Mbps DL and 5.73 Mbps UL
Multiple LTE FDD bands
Quadband UMTS and GSM
IEEE 802.11b/g/n WiFi with 2×2 MIMO up to 300 Mbps
IEEE 802.3 and IEEE 802.3u standards
Four Ethernet ports
Durable aluminum housing
External antennas
Dual SIM
Dual image

חיפוש וידאו אוטומטי לפי שם של המוצר (ייתכן שהתוצאה לא תואמת למוצר המפורסם באתרינו).

Teltonika RUT950 LTE 4G Router

Product Description

Standard package contains

TECHNOLOGY

HARDWARE

FIRMWARE

Specifications